Loudspeakers with rectangular wooden sound boxes have become too boring. Modern speaker players are now on the hunt for more innovative and unique designs. 3D printing technology was born to meet this requirement very well. 3D printed speakers: The most interesting sound box manufacturing solution. Let’s join Smart Design Labs to discover how cool the speaker is 3D printed!
3D printed speakers
You want to make a speaker that is both unique and sounding good? First of all, let’s talk a little bit about science:
Outdoor speakers, without a housing, cannot effectively produce sound at low frequencies. This is because two sound waves created from the front and rear surfaces of the speaker interfere with each other, resulting in poor sound quality, echo, and echo.
This phenomenon is called phase cancellation. And that’s why the speaker and the speaker box are two inseparable objects. The speaker box acts as an isolator, which is important in preventing sound suppression to increase speaker efficiency.
If a closed box is used, sound suppression can be avoided. But the sound transmitted to the back of the speaker will be lost. This requires the speaker box to be able to avoid suppressing sound. At the same time, it is still possible to restore output from sound. And that is why the 3D printing technology of the speaker box was born.
3D Printed Speakers technology appeared as a new wave
Over the past decades, sound box solutions have been proposed and developed. However, producing promising results is difficult with scarce resources. In addition, fabrication costs tend to increase. So many commercial designs still keep the shape of the rectangular prism.
With the relatively new 3D printing technology, it is now possible to not only create aesthetically pleasing designs, but also possess very good sound quality. Since then, a revolution in sound box production has taken place.
Discover some designs of 3D printed speaker box here: https://3dshop.com.vn/bo-suu-tap-loa-in-3d-dep-nhat/
Before starting to 3D printed speakers, you should note the following:
The hard wall of the speaker box is less likely to cause unwanted resonances, and therefore clearer sound. The wall of the speaker box should be about 5 mm thick with a fill greater than 50% to create a compact with good sound characteristics. The interior of the cabinet should be covered with soft absorbent material such as cotton pad or hydro-wool. This will help create a softer and warmer sound. Because it eliminates resonances that produce a harsh sound.
Above are the basic information about 3D speaker technology. If you want to find a place to buy 3D printer or 3D printedspeaker service , please contact us immediately at the address.
Address: 86 Le Trong Tan – Thanh Xuan – Hanoi
Telephone number: 024.7300.7070
Hotline: 035 8736 772
Facebook: Smart Design Labs Co., Ltd.
Email: contact@3dshop.com.vn
Website: https://smartdesignlabs.com/
